H31
FAÇADE CLADDING AND
FAÇADE SCREENS
Alucopal
Alucopal, optimal design freedom
Alucopal is an aluminum composite material that is very suitable as a durable facade cladding. Used as a flat panel or cassette. The material is easy to process in many shapes for awnings and column cladding, for example. Alucopal gives the facade an extra dimension and completes creations.
Double-sided aluminum top layer with single or double-sided decor
UV and weather resistant
Gloss and matte decors
Bendable and deformable
Can be used as a panel or cassette
10 year guarantee
Alucopal BV is certified by the AluEco foundation. A high-quality and sustainable use of our aluminum facade cladding is guaranteed.
ALUCOPAL
Address: Industrieweg 92
Postal code: 5145 PW
Place: Waalwijk
T: 0416 - 672400
E: info@alucopal.com
W: www.alucopal.com
Product
TECHNICAL PROPERTIES
wrapper
0.5mm quality 3003 H16moment of resistance
1.74 cc / m Wbending stiffness
2400 kNcm2 / m EItensile strength
140 - 192 N / mm2elastic modulus (E)
70,000 N / mm 20.2% yield strength
90 N / mm2temperature range
-50 ° C to + 80 ° Cexpansion coefficient
2.4 mm / m ΔT 100 ° Cwater absorption
nilweight
5.5 kg / m2
Alucopal consists of a core of polyethylene that is connected on both sides with an aluminum layer. The combination of chemical and thermal bonding gives the plates a particularly high strength and rigidity. The visible side has a durable PVDF coating.
Alucopal PVDF coating
The plates have a durable PVDF coating on the front. This coating has a very long life and color fastness. This coating system has proven itself in practice and is very durable. Alucopal can be supplied with a surface in matt and gloss (glossy). The back of the plates has a protective polyester coating.
coating layer: PVDF
hardness: 2H
gloss level: 30 - 45% ST surface
back coating: polyester
Maintenance tips
Some general tips to keep Alucopal facade elements in top condition:
-
avoid damaging the protective layer
-
inspection of all elements
-
use neutral detergents
-
panels that have been heated by the sun to a temperature of 40 Cº or higher may not be cleaned, there is a risk of staining due to the rapid drying of the facade elements
-
do not use abrasive cleaning agents, as this will scratch the coating of the panels
-
do not use alkaline cleaning agents such as soda or caustic soda. Strongly acidic cleaning agents may also not be used
-
the facade is best cleaned from bottom to top. This prevents contaminated soap residues from strongly polluting the underlying part of the facade in the case of cleaning from top to bottom and possibly adhering to underlying facade parts
-
a cleaning agent should in principle be tested on an inconspicuous part of the facade in order to check its effectiveness before it is applied to the entire facade
-
after cleaning, rinse the facade thoroughly with clean water to remove soap residue from the facade
-
excess water should be removed with a chamois, squeegee or sponge to prevent stains, etc
